Questions? Feedback? powered by Olark live chat software

CT Series HDD/SSD Duplicator and Sanitizer 1-5 (CT600G)

CT Series
CT Series HDD/SSD Duplicator and Sanitizer 1-5 (CT600G)
  • Flexible productivity, use one station for 5 targets or link       multiple stations up to 250 targets.
  • High performance of up to 9GB/min* transfer speed per minute. (Real performance depends on HDD speed)
  • Supports up to 9TB capacity of Hard disk drive.
  • Features high security level of data sanitization: DoD erase and Secure Erase.
  • Supports 3.5”/2.5” SATA/SSD, mSATA, eSATA, ZIF, iVDR interface and IDE HDD via IDE_SATA convertor. (IDE to SATA. is optional)   adapter-TB1529.
  • Event Log report records all task details for better production management and yield analysis.
  • Daisy-Chain technology makes production more efficient as the number of connections increase. (Patent No.: US 9,349,408 B2)

Impeccable High Speed

U-Reach drive duplicator is capable of copying at 9GB/min. on all devices simultaneously, without any speed degradation as number of targets increase. 9 GB per minute is far beyond PC-based duplicators.

Innovative Guiding Module Design

Easily Plug in and copy. No need for manual cable connections on each HDD. Just slide the HDD into each guiding module, which greatly reduces operation time by avoiding cable connection. In addition, it supports many HDD models (eSATA, mSATA SSD, iVDR, 2.5”SATA, ZIF) with special carrier modules. The easily replaceable interface can alleviate the hassle of replacing the wearing interface.

Device Compatibility

• Supports GPT, MBR table format.
• Supports Advanced format HDD, Up to 10+TB device.
• Support OS: Linux, Unix, Windows, Macintosh, etc.

3 Different Duplication Modes Are Supported

Quick Copy, All Partitions and Whole HDD copy. If you have a 2TB capacity HDD that has only 200GB of data inside, Quick Copy helps reduce duplication time from 5.6 hours to 33 minutes since it will not copy the empty space.

Systems & Data Copy

This mode identifies HDD Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX) formats. It will only copy the data and system contained area, which enhances the copying efficiency.

Support a Variety of Interfaces

Supports eSATA, iVDR, M.2 (NGFF), and CFast Card(Requires adaptors).

Free Chain

Up to 10 duplicators can be connected, which means 59 targets can be duplicated at the same time, with no speed degradation!

Ultra-High Speed Data “Compare” Function

The exceptional bit-for-bit “Compare” function is the most secure way to guarantee 100% data duplication accuracy. It runs at the same speed as copying does. There is no other duplicator that can perform as fast or accurately..

4 Sanitization Methods

Quick Erase – Erase HDD index table, and only takes A FEW SECONDS to complete
Full Erase – Erases the entire HDD
DoD Erase – Complies with U.S. Department of Defense erasure standards.
Secure Erase – A National Institute of Standards and Technology 800-88 accepted technique for properly purging                                 hard drives. This method is supported by almost all modern SATA HDD.

     DoD Erase with Compare Method:

Log Report Management

Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).Real-time recording and viewing Log Report via PC-Link

Real-Time PC Monitoring

Flawlessly MONITORS work progress during operation. It displays all information, such as writing speed, operation time, percentage of completion, etc. for EVERY PORT, which is a powerful tool for sorting out the HDD writing lag and ensuring the operational efficiency. All the information you need will appear on the PC screen.

1. Duplication status is monitored from PC while connected to it.

2. “iSecuLog” shows and records the brand name, model, S/N, duplication time, result of every HDD from all the
​​​​​​​    ports and the info of both source HDD and target HDD.

3.Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication
​​​​​​​   speed of every  port in “Event Log”.

4.Select dates to export part of the data log. Just one click will export the data into a .txt file and save on PC.
​​​​​​​   The date of  export is the file name. (e.g. 20130308.txt)

Auto Power Control System

When the HDD duplicator stops executing any function, the machine will automatically cut off the power to each port to protect the HDD from damage during removal from the HDD duplicator. The power to each port will only be supplied when the machine is on.

Excellent Heat Radiation

Platform design helps control heat radiation for better operation stability.

Standalone Operation

There are two operational modes: standalone or PC-link. Each mode suits various needs. Standalone is an extremely simple, user-friendly operation with only four buttons needed to accomplish infinite duplication demands.

Easy and User-Friendly Interface

Very simple and uncomplicated to use. High level of expertise is not required for operation. Easy low cost maintenance.

Easy to Understand LED Indication

Have you ever frustrated by unclear LED signals? We understand how frustrating that can be, that’s why we’ve made the LED indication unmistakable: Pass → green light; Fail → red light, nice and easy!